up | Inhaltsverzeichniss | Kommentar

Manual page for DBCONFIG(8)

dbconfig - initializes the dial box


/usr/etc/dbconfig serial-device


dbconfig opens the designated serial port and sets its baud, parity and transmission rates. It also removes all STREAMS modules already pushed upon it (such as ttcompat.4m and ldterm.4m and pushes the dial box STREAMS module ``db'' onto the device. db then holds the stream open to maintain this configuration.

If the device /dev/dialbox has not been created and linked to the serial port, dbconfig will fail.




db.4m ldterm.4m ttcompat.4m dialtest.6

index | Inhaltsverzeichniss | Kommentar

Created by unroff & hp-tools. © by Hans-Peter Bischof. All Rights Reserved (1997).

Last modified 21/April/97